edgeSV is the equipment health brand of NTEK System Co., Ltd. ntek@nteksys.com
edgeSV
Request a demo
Overview

Pumps are essential to a building's water supply and chilled- and hot-water circulation. In this scenario, SV500 analyzes voltage and current signals from the pump drive motor to diagnose the condition of both the pump and motor.

Target equipment
Water supply pumpsPump drive motorsChilled- and hot-water circulation pumpsBooster pumps

Operating challenges

Many pumps run continuously, allowing wear and mechanical problems to develop gradually.

01

Water-supply pump failures and outages

At a 17-story apartment building in Atlanta, three of four supply pumps failed, causing low pressure for about a month before the water supply stopped. At an apartment complex in Seoul's Gangseo District, flooding in the pump room disabled the supply pumps and required emergency bottled water and temporary pumping equipment.

02

Unexpected pump failures

A stopped pump can disrupt building operations, including the water supply and chilled- and hot-water circulation.

03

Limited visibility of distributed equipment

It is difficult to monitor in real time the pumps installed across multiple mechanical rooms.

What SV500 detects

SV500 uses ESA to analyze electrical signals from pump drive motors and diagnose flow abnormalities and faults in the motor and drive equipment.

01

Pump flow abnormality detection

Detects flow turbulence, cavitation, and blade or vane damage in pumps.

02

Motor and drive equipment diagnosis

Detects bearing problems, shaft misalignment, mechanical unbalance, soft foot, winding insulation degradation, ground leakage current, and load-related problems.

03

Adaptive thresholds

Machine learning learns each asset's normal state and evaluates its condition using thresholds that adapt to load. This applies criteria suited to the specific asset and operating condition instead of a fixed threshold.

04

Web dashboard and data integration

The built-in web dashboard shows each diagnostic parameter in real time, allowing remote condition checks. Data can be integrated with upper-level systems over Modbus RTU, Modbus TCP, MQTT, and RESTful API.

Benefits

Teams can identify pump abnormalities early and plan maintenance more effectively.

01

Early detection of potential failures

Detects developing faults early to minimize unexpected incidents and operational risk.

02

Optimized maintenance schedules

You can predict and optimize maintenance schedule based on diagnostic data.

03

Reduce cost and downtime

It helps reduce energy consumption, maintenance costs and downtime by increasing equipment driving efficiency.

Operational Impact of edgeSV

Continuous monitoring and early detection support availability, maintenance and energy efficiency.

20~40% Reduction in unplanned downtime
10~25% Maintenance cost savings
5~15% Energy savings
10~20% Longer equipment life

Illustrative ranges, not verified SV500 results. Actual outcomes depend on site conditions and corrective actions; PoC validation is required.

Which asset comes first?

Name the one that matters most and we will set out the diagnostics and measurement points for it.

Request a demo