Degradation and outage risk
Aging of the transformer that powers the whole building raises the risk of a blackout.
Transformer stress, harmonics and loading are monitored to protect the power behind the whole building.
Building transformers carry power to HVAC, elevators, IT and lighting. SV500 records load ratio and harmonic trends from secondary-side voltage and current to screen for signs of transformer stress.
Transformer degradation can lead to a building-wide outage.
Aging of the transformer that powers the whole building raises the risk of a blackout.
Non-linear loads and added equipment can stress transformers, so long-term trends matter.
SV500 analyzes secondary-side voltage and current of the transformer.
Tracks secondary imbalance, harmonics and load ratio trends. Confirmation uses insulation resistance and dissolved gas tests.
Records voltage/current THD with load ratio and matches high-harmonic periods to running loads to narrow the source circuit.
Trends leakage only on circuits fitted with a ZCT. Insulation condition is confirmed by periodic insulation tests.
Machine learning learns each asset's normal condition and judges its status with load-dependent adaptive thresholds, rather than fixed limits.
Check diagnostic status in real time on the device's built-in web dashboard without a site visit, and connect to higher-level systems such as BMS or SCADA over Modbus TCP/RTU. Additional interfaces such as MQTT depend on the project configuration.
Decide when to inspect transformers from data and reduce outage risk.
Read load ratio and harmonic trends alongside maintenance history.
Event records before protection trips let you check recurring periods first.
Compare health grades across equipment on one common basis.
Continuous monitoring and early detection support availability, maintenance and energy efficiency.
Illustrative ranges, not verified SV500 results. Actual outcomes depend on site conditions and corrective actions; PoC validation is required.
Name the one that matters most and we will set out the diagnostics and measurement points for it.
Request a demo