edgeSV is the equipment health brand of NTEK System Co., Ltd. ntek@nteksys.com
edgeSV
Request a demo
Three-phase induction motor and driven equipment installed in an industrial facility
Home / Product / SV500 Motor
SV500 · Motor condition monitoring

Detect issues through electrical signalsEdge AI predictive maintenance for motors

Detect early signs of faults in motors, VFDs, and driven equipment while monitoring power quality and energy in one device.

Overview

One platform for motor diagnostics and power management

SV500 uses Edge AI to analyze three-phase voltage and current signals and identify early signs of faults in motors and variable-frequency drives (VFDs). Measurements are taken in the electrical room or MCC panel, so no separate vibration sensor is required.

2 channels Independent asset monitoring
Edge AI On-device diagnostics
32 kHz Waveform-based analysis
All-in-One Diagnostics · PQ · Energy
SV500

Key features

01 Motor Monitoring

Motor condition diagnostics

Electrical signals and machine learning reveal electrical and mechanical motor abnormalities.

  • Unbalance, shaft misalignment, and bearing faults
  • Broken rotor bars, eccentricity, and stator winding or insulation faults
  • Load variation, torque ripple, and leakage-current analysis
02 VFD Monitoring

VFD condition diagnostics

Input- and output-side signals are used to monitor operating condition.

  • Primary- and secondary-side voltage, current, and frequency measurement
  • Voltage and current unbalance and harmonic analysis
  • Tracking of operating changes and early fault indicators
03 Power Quality & Energy

Power quality and energy

Power-quality and energy data are analyzed in a single workflow.

  • Sag/swell, interruption, and transient detection
  • THD, TDD, and harmonics up to the 63rd order
  • Power, power factor, energy, and ITIC / EN 50160 evaluation
04 Web Dashboard

Built-in web dashboard

View results and configure the device in a browser without installing dedicated software.

  • Real-time measurements, diagnostic results, and trends
  • Up to 32 alarms plus event history and waveform review
  • Combined power-quality and asset-condition reports
SV500 DIAGNOSTICS

Key diagnostic functions

Analyze motor and inverter electrical signals together to track changes in asset condition and incoming power quality.

01 Motor diagnostics

Electrical and mechanical indicators

  • Unbalance, shaft misalignment, and bearing faults
  • Broken rotor bars, eccentricity, and stator winding or insulation faults
  • Load variation, torque ripple, and leakage-current analysis
02 Inverter diagnostics

VFD operating condition

  • Primary- and secondary-side voltage, current, and frequency measurement
  • Voltage and current unbalance and harmonic analysis
  • Tracking of operating changes and early fault indicators
03 Power quality

Supply and load condition

  • Sag, swell, interruption, and transient detection
  • THD, TDD, and harmonics up to the 63rd order
  • Power, power factor, and energy evaluation
SV500 SYSTEM

System configuration and communications

Review the SV500 measurement arrangement and network connections in sequence.

SV500

Specifications

SV500 equipment condition monitoring device
Measurement input (voltage) Input type Supports 3-phase 3-wire (3P3W) and 3-phase 4-wire (3P4W)
Voltage channels L1, L2, L3, Ln-1, L4, L5, L6, Ln-2
Voltage range Up to 400 V (L-N) / 690 V (L-L)
Sampling 32 kHz waveform-based measurement
Accuracy Voltage ±0.2%
Measurement input (current) Input type External CT (Current Transformer)
Current channels L1, L2, L3, L4 (leakage), L5, L6, L7, L8 (leakage)
Measurement range Approx. 5 mA to 3,000 A (depending on CT specification)
Supported CT types 5A CT, mV-output CT, Rogowski coil, and more
Accuracy Current ±0.5%
Communication / interface RS485 2 ports (Master 1, Slave 1), Modbus RTU support
Ethernet Built-in 2-port switch, 10/100/1000 Mbps
Protocols Modbus TCP, Modbus RTU
USB-C Console access, firmware updates, Wi-Fi/LoRa module expansion
Power supply Input power DC 24 V
Power consumption Approx. 5 W or less (typical operation)
Protection Internal power protection against overvoltage/overcurrent
BUILT-IN WEB UI

Motor condition and power data in one view

Use a browser to review real-time measurements, diagnostic results, alarms and events, trends, and power-quality information.

01

Core monitoring

  • Real-time voltage and current acquisition with high-speed FFT and ESA analysis
  • Unified diagnostic data for load behaviour, power quality, and mechanical imbalance
02

Reports and analytics

  • Digital-twin and ML/AI-based anomaly detection
  • Condition prediction for rotating assets such as motors, pumps, fans, and compressors
03

Settings and asset management

  • Unified real-time measurements, power quality, and diagnostic results
  • Events, alarms, history, and reporting

Start smarter predictive maintenance with SV500

Bring motor diagnostics, power quality, and energy management together in one solution.