edgeSV is the equipment health brand of NTEK System Co., Ltd. ntek@nteksys.com
edgeSV
Request a demo
Home / Industries / AI Building / Indoor air quality systems

Indoor air quality systems

Ventilation and filtration fan load changes point to clogged filters or airflow problems that affect air circulation and compliance.

Overview

Keeping indoor air quality under control requires air handling units (AHU) and supply/exhaust fans to run reliably. In this scenario SV500 measures and analyzes the three-phase voltage and current signals of the fan drive motors with PTs and CTs to detect abnormalities in the fans and motors early.

Target equipment
AHU fansFan drive motorsSupply and exhaust fansVFD

Operating challenges

HVAC fans and motors run for long hours and can slowly deteriorate through wear.

01

An exhaust fan failure case

At North District Hospital in Hong Kong a ground fault in an exhaust fan of the isolation ward negative-pressure exhaust system triggered an alarm, and operation returned to normal in about 20 minutes after switching to the standby exhaust fan.

02

Common AHU faults

A study of more than 60,000 HVAC units in US commercial buildings reported faults in 40% of AHUs on a daily basis.

03

Hidden early abnormalities

Early faults in fans and motors are hard to find in routine inspection, and action is sometimes taken only after a failure.

04

Distributed equipment

It is hard to check on site the operating condition of HVAC equipment scattered throughout a building.

What SV500 detects

SV500 uses ESA to analyze the voltage and current signals of fan motors and diagnose abnormalities in the motor and drive equipment.

01

Fan and motor diagnosis

Detects mechanical unbalance, bearing problems, shaft misalignment, fan flow turbulence, blade and vane damage and load-related problems.

02

VFD operation diagnosis

For fans driven by a VFD, SV500 analyzes voltage, current and frequency signals on the VFD secondary (output) side at 8 kHz to predict and diagnose potential faults.

03

Adaptive thresholds

Machine learning learns the normal state of each asset and judges condition with thresholds that adapt to load. Criteria matched to each asset and load condition are applied instead of fixed thresholds.

04

Web dashboard and data integration

The equipment web server dashboard shows status per diagnostic parameter in real time, so condition can be checked without a site visit, and data can be integrated with upper-level systems over Modbus RTU, Modbus TCP, MQTT and RESTful API.

Benefits

Abnormalities in HVAC fan equipment can be identified early so maintenance can be planned.

01

Early detection of potential failures

Detects potential failures early to minimize unexpected incidents and risk.

02

Optimized maintenance schedules

Diagnostic data helps predict and optimize maintenance schedules.

03

Lower cost and downtime

Higher operating efficiency helps reduce energy consumption, maintenance cost and downtime.

Operational Impact of edgeSV

Continuous monitoring and early detection support availability, maintenance and energy efficiency.

20~40% Reduction in unplanned downtime
10~25% Maintenance cost savings
5~15% Energy savings
10~20% Longer equipment life

Illustrative ranges, not verified SV500 results. Actual outcomes depend on site conditions and corrective actions; PoC validation is required.

Which asset comes first?

Name the one that matters most and we will set out the diagnostics and measurement points for it.

Request a demo