Rarely running equipment
Because it seldom runs, condition changes are easy to miss on walk-around inspections.
The electrical behavior of backup power equipment is checked when it runs, so readiness is known before it is needed.
Emergency power runs so rarely that its condition under real load is hard to build up. SV500 records voltage, current and frequency during tests and real-load runs so changes between tests can be compared.
It is hard to know whether emergency power will run when needed.
Because it seldom runs, condition changes are easy to miss on walk-around inspections.
Failing to start at the critical moment is the main risk, so behavior during runs must be recorded.
SV500 records the electrical behavior of the generator while it runs.
Records voltage build-up, frequency stabilization time and load sharing, and flags runs that differ most from earlier ones.
Logs voltage dip and recovery time and inrush current at load pick-up and transfer to pick out runs for governor/AVR review.
Records voltage/frequency swings, imbalance and harmonics, separating utility from generator power; transfers are logged as separate events.
Machine learning learns each asset's normal condition and judges its status with load-dependent adaptive thresholds, rather than fixed limits.
Check diagnostic status in real time on the device's built-in web dashboard without a site visit, and connect to higher-level systems such as BMS or SCADA over Modbus TCP/RTU. Additional interfaces such as MQTT depend on the project configuration.
Assess emergency power readiness from test-run records.
Compare start-up and load response under the same conditions at each test.
Accumulated records give a basis to anticipate behavior in a real outage.
Compare health grades across equipment on one common basis.
Continuous monitoring and early detection support availability, maintenance and energy efficiency.
Illustrative ranges, not verified SV500 results. Actual outcomes depend on site conditions and corrective actions; PoC validation is required.
Name the one that matters most and we will set out the diagnostics and measurement points for it.
Request a demo