edgeSV is the equipment health brand of NTEK System Co., Ltd. ntek@nteksys.com
edgeSV
Request a demo
Overview

Forced draft fans (FDF) supply combustion air to the boiler, induced draft fans (IDF) exhaust the combustion gas, and primary air fans (PAF) send primary air to the coal mills. In this scenario SV500 analyzes the voltage and current signals of the motors and VFDs that drive these fans to detect abnormalities in the fans and motors early.

Target equipment
Forced draft fans (FDF)Primary air fans (PAF)Induced draft fans (IDF)Fan drive motorsVFD
Key challenges

Operating challenges

Draft fans run for long hours under operating conditions that change with generation output.

01

Operating conditions that change with output

Airflow and load vary with generation output and VFD drives are increasing, so fan condition is hard to judge with fixed criteria alone.

02

Large distributed equipment

It is hard to check on site, one by one, the condition of fans installed in several places around the boiler.

How SV500 diagnoses

What SV500 detects

SV500 uses ESA to analyze the electrical signals of fan drive motors and VFDs and diagnose abnormalities in the fans and motors.

01

Fan diagnosis

Detects fan mechanical unbalance, blade and vane damage and flow turbulence.

02

Motor and drive diagnosis

Detects bearing problems, broken rotor bars, static and dynamic eccentricity, shaft misalignment, soft foot and load-related problems.

03

VFD operation diagnosis

For fans driven by a VFD, SV500 analyzes voltage, current and frequency signals on the VFD secondary (output) side at 8 kHz to predict and diagnose potential faults.

04

Power quality monitoring

Analyzes voltage sag/swell, total harmonic distortion (THD) and voltage and current imbalance in real time to identify equipment impact and abnormal conditions caused by poor power quality at an early stage.

05

Adaptive thresholds

Machine learning learns the normal state of each asset and judges condition with thresholds that adapt to load. Criteria matched to each asset and load condition are applied instead of fixed thresholds.

06

Web dashboard and data integration

The equipment web server dashboard shows status per diagnostic parameter in real time, so condition can be checked without a site visit, and data can be integrated with upper-level systems over Modbus RTU, Modbus TCP, MQTT and RESTful API.

Expected benefits

Benefits

Abnormalities in scattered fan equipment can be identified early and remotely so maintenance can be planned.

01

Early detection of potential failures

Detects potential failures early to minimize unexpected incidents and risk.

02

Optimized maintenance schedules

Diagnostic data helps predict and optimize maintenance schedules.

03

Lower cost and downtime

Higher operating efficiency helps reduce energy consumption, maintenance cost and downtime.

SV500 analyzes the voltage and current signals of the motors and VFDs that drive draft fans with ESA and, with adaptive thresholds that follow operating conditions, detects abnormalities such as mechanical unbalance, bearing problems and blade damage early.

Which asset comes first?

Name the one that matters most and we will set out the diagnostics and measurement points for it.

Request a demo