Risk of generator trip
Faults affect connected processes, so it is better to find intervals where health indicators change than to recover after failure.
The condition of excitation transformers is monitored because a failure can take a unit offline.
The excitation transformer powers the generator's excitation system, and its failure can stop the generator. SV500 keeps voltage and current events and waveforms so they can be aligned in time with generator protection records.
An excitation transformer failure can lead to a generator trip.
Faults affect connected processes, so it is better to find intervals where health indicators change than to recover after failure.
Without visibility of steady load, condition changes and events need to be recorded continuously during operation.
SV500 tracks changes in voltage and current signals on the transformer secondary.
Compares secondary imbalance and harmonics across periods with the same excitation conditions. Insulation tests confirm; SV500 helps decide when to test.
Records voltage and current events from excitation changes and rectifier load, and keeps transient waveforms at load switching.
Rectifier loads create constant harmonics, so SV500 watches the trend at the same excitation current. Actual temperature needs a temperature sensor.
Machine learning learns each asset's normal condition and judges its status with load-dependent adaptive thresholds, rather than fixed limits.
Check diagnostic status in real time on the device's built-in web dashboard without a site visit, and connect to higher-level systems such as BMS or SCADA over Modbus TCP/RTU. Additional interfaces such as MQTT depend on the project configuration.
Running trends help adjust inspection scope and choose what to check in planned outages.
Excitation-side trends put items that could cause a trip on the check list.
Running trends added to scheduled checks help adjust timing.
Compares health grades on one basis to set inspection order.
SV500 records voltage and current events tied to excitation conditions and rectifier load. Confirming diagnosis of exciter semiconductors, field circuits and insulation requires dedicated excitation and protection measurements.
Name the one that matters most and we will set out the diagnostics and measurement points for it.
Request a demo