edgeSV is the equipment health brand of NTEK System Co., Ltd. ntek@nteksys.com
edgeSV
Request a demo
Overview

Pulverizers grind coal for the boiler and are core plant equipment. SV500 uses electrical signature analysis (ESA) on drive-motor current and load trends to screen for rising resistance in rollers, gearbox and bearings.

Target equipment
Pulverizer motorsGearbox, roller drivesVFD, feeder loads
Key challenges

Operating challenges

A pulverizer drive-motor problem can lead to an output restriction.

01

Can limit plant output

Faults affect connected processes, so it is better to find changing intervals early and secure planned maintenance time.

02

Heavy load and dust

Wear progresses gradually, and early changes often show in current and load patterns before noise or temperature.

How SV500 diagnoses

What SV500 detects

SV500 compares motor current and power across periods with similar coal feed.

01

Motor load anomalies

Compares current and power for similar feed rate, output and coal type. Load swings from coal properties are normal.

02

Rotor and stator anomalies

Screens related components in the current spectrum at steady speed, helping time inspections of high-voltage motors rarely taken offline.

03

Bearing wear

Tracks changes in rotation-frequency components at the same feed rate. If the trend persists, check lubrication and bearings.

04

Adaptive thresholds

Machine learning learns each asset's normal condition and judges its status with load-dependent adaptive thresholds, rather than fixed limits.

05

Web dashboard and integration

Check diagnostic status in real time on the device's built-in web dashboard without a site visit, and connect to higher-level systems such as BMS or SCADA over Modbus TCP/RTU. Additional interfaces such as MQTT depend on the project configuration.

Expected benefits

Benefits

Running trends help adjust outage scope and pick what to inspect first.

01

Lower output-limit risk

Screens inspection targets before coal feed is restricted.

02

Shift to planned work

Trends let inspection items be set ahead of outages.

03

Data-driven priorities

Compares health grades on one basis to set inspection order.

SV500 compares pulverizer motor current and power across similar feed conditions to screen inspection targets. Coal fineness and moisture, internal wear, and fire and dust safety need process measurement and internal inspection.

Which asset comes first?

Name the one that matters most and we will set out the diagnostics and measurement points for it.

Request a demo