edgeSV is the equipment health brand of NTEK System Co., Ltd. ntek@nteksys.com
edgeSV
Request a demo
Overview

Stormwater and drainage pumps sit idle for long periods, then run at high load during heavy rain. SV500 builds up test-start voltage and current records using Electrical Signature Analysis (ESA) to screen for seizure, bearing wear and clogging candidates.

Target equipment
Stormwater pumpsDrainage pumpsStandby pumpsGate-linked motors
Key challenges

Operating challenges

Rarely run pumps often reveal problems only when actually started.

01

Infrequent operation

Long-idle equipment can look normal until started, so start-up and load response during periodic tests must be recorded repeatedly.

02

Failures during storms

Faults surface during heavy rain, directly affecting operating reliability and maintenance scheduling.

What SV500 detects

01

VFD Status Diagnostics

Analyzes VFD input/output voltage and current waveforms to assess rectifier diodes, DC-link capacitors, IGBTs, and the condition of the power supply and power quality.

02

Motor Status Diagnostics

Analyzes motor voltage and current signals without additional equipment-mounted sensors, screening mechanical faults (cavitation, bearings, vibration), electrical faults (stator, cable connections, heat), and load fluctuations.

03

Power Quality Diagnostics

Records and analyzes voltage, current, interruptions, sags, swells, harmonics, and trends to identify power quality abnormalities.

04

Edge AI Device

Performs diagnostic analysis and stores waveforms and results locally. The built-in web interface provides real-time measurements, equipment diagnostics, power quality, events, and reports.

Expected benefits

Benefits

Use pre-season test-start records to set inspection order and standby readiness.

01

Storm preparedness

Use test-start results to set inspection order and standby placement.

02

Early fault detection

Service units whose behavior changed in test starts first.

03

Data-based priorities

Use condition grades and trends to send staff to the highest-risk units first.

Operational Impact of edgeSV

Continuous monitoring and early detection support availability, maintenance and energy efficiency.

20~40% Less unplanned downtime
10~25% Maintenance cost savings
5~15% Energy savings
10~20% Longer equipment life

Indicative ranges only; actual results depend on site conditions and corrective actions.

Which asset comes first?

Name the one that matters most and we will set out the diagnostics and measurement points for it.

Request a demo