edgeSV is the equipment health brand of NTEK System Co., Ltd. ntek@nteksys.com
edgeSV
Request a demo
Home / Industries / AI Water Management / Power quality monitoring

Power quality monitoring

Voltage sags, harmonics and imbalance are recorded together with pump and blower condition, so VFD trips can be traced to their cause.

Overview

Pumps and blowers driven by VFDs can trip because of power disturbances. In this scenario SV500 measures the three-phase voltage and current of pumps and blowers to monitor power quality and motor and VFD condition together.

Target equipment
Inflow pumpsAeration blowersVFD

Operating challenges

Power disturbances can lead to the shutdown of treatment equipment.

01

Power disturbances and VFD trips

At the Commerce Township wastewater treatment plant in Michigan, USA, frequent power disturbances after VFDs were installed forced operators to reset process equipment manually, resulting in several hours of unplanned shutdown and damage to two VFDs.

02

Difficulty identifying the cause

Only after installing a voltage monitor did the same plant confirm that the timing of voltage disturbances matched the VFD overvoltage trips, and it used this data in discussions with the utility.

What SV500 detects

01

VFD Status Diagnostics

Analyzes VFD input/output voltage and current waveforms to assess rectifier diodes, DC-link capacitors, IGBTs, and the condition of the power supply and power quality.

02

Motor Status Diagnostics

Analyzes motor voltage and current signals without additional equipment-mounted sensors, screening mechanical faults (cavitation, bearings, vibration), electrical faults (stator, cable connections, heat), and load fluctuations.

03

Power Quality Diagnostics

Records and analyzes voltage, current, interruptions, sags, swells, harmonics, and trends to identify power quality abnormalities.

04

Edge AI Device

Performs diagnostic analysis and stores waveforms and results locally. The built-in web interface provides real-time measurements, equipment diagnostics, power quality, events, and reports.

Benefits

Power quality events and equipment condition can be recorded together so abnormalities can be handled in advance.

01

Early detection of potential failures

Detects potential failures early to minimize unexpected incidents and risk.

02

Optimized maintenance schedules

Diagnostic data helps predict and optimize maintenance schedules.

03

Lower cost and downtime

Higher operating efficiency helps reduce energy consumption, maintenance cost and downtime.

Operational Impact of edgeSV

Continuous monitoring and early detection support availability, maintenance and energy efficiency.

20~40% Less unplanned downtime
10~25% Maintenance cost savings
5~15% Energy savings
10~20% Longer equipment life

Indicative ranges only; actual results depend on site conditions and corrective actions.

Which asset comes first?

Name the one that matters most and we will set out the diagnostics and measurement points for it.

Request a demo