edgeSV is the equipment health brand of NTEK System Co., Ltd. ntek@nteksys.com
edgeSV
Request a demo
Home / Industries / AI Logistics Center / Transformers and power quality

Transformers and power quality

Transformer stress and power events are recorded for the electrical backbone of the site.

Overview

Automation, refrigeration and charging loads can create imbalance, harmonics and momentary events on the transformer and distribution network. SV500 records long-term secondary-side trends and event waveforms to narrow down the causing loads.

Target equipment
Distribution TREquipment feedersCold storage/charging
Key challenges

Operating challenges

A transformer problem can affect operation of the entire center.

01

Site-wide operating impact

Transformer problems affect the whole logistics center, and a single-point measurement cannot separate their causes.

02

Load growth from expansion

Added equipment raises transformer load and harmonics, so trends in normal operation and events must be recorded.

What SV500 detects

01

VFD Status Diagnostics

Analyzes the VFD input/output voltage and current waveforms to identify faults in rectifier diodes, DC-link capacitors and switching devices (SCRs or IGBTs). Also monitors power-supply condition and power quality.

02

Motor Status Diagnostics

Analyzes motor voltage and current without additional equipment-mounted sensors. Screens mechanical issues (cavitation, soft foot, bearings and vibration), electrical issues (stator, connections, heat and noise), and load fluctuations.

03

Power Quality Status Diagnostics

Learns normal power-quality patterns and evaluates real-time deviations. Tracks voltage, current, interruptions, sags and harmonics to identify abnormal conditions.

04

Edge AI Server

Performs diagnostic analysis directly on SV500. Built-in storage (8GB eMMC and up to 256GB SD) retains waveforms and diagnostic data. Its web interface shows real-time values, equipment status, power quality, alarms, events and reports.

Expected benefits

Benefits

Use event and load history to review protection settings and expansion headroom.

01

Early power issue detection

Find recurring event periods to review protection settings and load allocation.

02

Expansion headroom

Peak load, peak time and phase skew show remaining margin against rating.

03

Data-driven priorities

Compares status grades and trends on one scale so scarce maintenance staff go to the highest-risk assets first.

Operational Impact of edgeSV

Continuous monitoring and early detection support availability, maintenance and energy efficiency.

20–40% Unplanned downtime
10–25% Maintenance cost
5–15% Energy savings
10–20% Equipment life

Illustrative ranges only; not verified SV500 performance. Actual results depend on equipment, site conditions and corrective actions.

Which asset comes first?

Name the one that matters most and we will set out the diagnostics and measurement points for it.

Request a demo